Operator's Manual

11.Adjusttherightpumplinkagebyusingawrench
toturnthedoublenutsontheassembly(Figure
57)
g006843
Figure57
1.Rotatethetrackingknob
onleftside.
2.Rotatethedoublenutson
rightside.
12.Movethesteeringleverstothereverseposition.
Whileapplyingslightpressuretothelevers,
allowthesteeringleverstoreturntoNEUTRAL.
Note:Thewheelsmuststopturningorslightly
creepinreverse.
13.Shutofftheengineandwaitforallmovingparts
tostop.
14.Removethejumperwirefromthewire-harness
connectorandplugtheconnectorintotheseat
switch.
15.Lowerthemachinefromthejackstands.
AligningthePTO-Drive
Pulley
AlignthePTO-drivepulleyforanyofthefollowing
conditions:
•Theblowerhasbeenremovedorreplaced.
•Theenginemountingboltshavebeenloosenedor
theenginehasbeenmovedorreplaced.
•Thejackshaftmountingboltshavebeenloosened
orthejackshafthasbeenmovedorreplaced.
1.Stopthemachineandmovethespeed-control
levertotheNEUTRALposition.
2.DisengagethePTO,engagetheparkingbrake,
shutofftheengine,andwaitforallmovingparts
tostop.
3.Removethefuel-tankmountingnutsandswing
outthefueltank.
4.Verifythattheblowerisinstalledandtightly
secured.
5.Loosenthe4enginemountingbolts.
6.Unhookthepump-belttensionspring.
7.Loosenthe4jackshaftmountingbolts.
8.Measuringfromtheblowerpulleyasabaseline,
movetheengineandjackshaftuntiltherear
surfaceofall3pulleysarealignedwithin0.8to
1.6mm(1/32inchto1/16inch)(Figure58).
Note:Useastraightedgetoalignall3surfaces.
g006846
Figure58
1.Alignthe3pump-drive
pulleysurfacesshown
withthispatternwithin0.8
to1.6mm(1/32inchto
1/16inch).
2.Alignthe3PTO-drive
pulleysurfacesshown
withthispatternwithin0.8
to1.6mm(1/32inchto
1/16inch).
9.Tightenthe4enginemountingboltsand4
jackshaftmountingbolts.Checkthealignment
aftertightening.
10.Installthepump-belttensionspring.
11.Swingthefueltankinandinstallthetank
mountingnuts.
12.Alignthepump-drivepulley;Aligningthe
Pump-DrivePulley(page50).
AligningthePump-Drive
Pulley
Thepump-drive-pulleyalignmentisnecessaryforany
ofthefollowingconditions:
•Theenginemountingboltshavebeenloosenedor
theenginehasbeenmovedorreplaced.
•Thepumppulleyshavebeenloosened,moved,
orreplaced.
•ThePTOpulleyhasbeenaligned;refertoAligning
thePTO-DrivePulley(page50).
50