Operator's Manual

1.Shutoffthemachineandmovethespeed-control
levertotheNEUTRALposition.
2.DisengagethePTO,engagetheparkingbrake,
shutofftheengine,andwaitforallmovingparts
tostop.
3.Loosenthesetscrewsonbothpumppulleys.
4.Usingastraightedge,aligneachpumppulley
withtheenginepulleybyslidingitalongthe
pumpshaft(Figure58).
5.Tightenthepulleysetscrewsandcheckthe
alignment.
AdjustingthePTOBrake
Spring
AdjustthePTObrakespringonlyiftheblowerhas
beenremovedorreplacedorifthePTOdriveidler
armhasbeendisassembled.
1.Stopthemachineandmovethespeed-control
levertotheNEUTRALposition.
2.DisengagethePTO,engagetheparkingbrake,
shutofftheengine,andwaitforallmovingparts
tostop.
3.Locatethebrakespringandthreadthe2jam
nutsouttotheendofthebrake-springrod
(Figure59).
4.Tightenthejamnutstogetheratendofthe
brake-springrod.
g006848
Figure59
1.Tightenthejamnutshere.
2.PTObrake-springassembly
AdjustingtheHopperDoor
1.Stopthemachineandmovethespeed-control
levertotheNEUTRALposition.
2.DisengagethePTO,engagetheparkingbrake,
shutofftheengine,andwaitforallmovingparts
tostop.
3.Loosenthe6doorhingenuts(Figure60).
4.Openthedoorandplacea3/8inch(9.5mm)
rubberstripor3/8inch(9.5mm)diameterhose
betweenthehopperandthehopperdoor(Figure
60).
5.Closethedoorandpushittightagainstthe
hopper.
6.Tightenthehingehardware.
7.Openthehopperdoorandremovetherubber
strip.
g025251
Figure60
1.Loosenthedoorhinge
nuts—3perside.
2.Placeapieceof9.5mm
(3/8inch)rubberonthis
surface.
51