Service Manual

A1-15TimeCutter ZX Service Manual
1b
Specifi cations cont.
ZX 480 ZX 525
Tires:
Rear Drive Tires 18x10.5-4 ply 18x10.5-10 4 ply with “Multitrac CS”
Tread
Front Castor Tires 410/350x4 with “sawtooth” tread 410/350x4 with “sawtooth” tread
Tire Pressure 13 psi (90kPa) rear, 35 psi (241kPa) front 13 psi (90kPa) rear, 35 psi (241kPa) front
Electrical System:
Battery voltage 12 volt negative ground. 12 volt negative ground.
Fused (1) 30 amp blade type main.
(1) 25 amp blade type charge system.
(1) 25 amp blade type charge system.
(1) 30 amp blade type main.
(1) 25 amp blade type charge system.
(1) 10 amp (blade type) included with
optional light kit.
Dimensions:
Wheel Base 52.1” (132.3cm) center of castor wheel to
center of drive tires.
52.1” (132.3cm) center of castor wheel to
center of drive tires.
Width 43” (109.2cm) outside rear tires. 47.6” (120.9cm) outside rear tires.
Overall Width 62.5” (158.8cm) with deck defl ector
down.
53.5” (135.9cm) Gate width with deck
defl ector up.
68” (165.1cm) with deck defl ector down.
55” (147.3cm) Gate width with deck
defl ector up.
Overall Length 77.5” (196.9cm) 77.5” (196.9cm)
Overall Height 40” (101.6cm) 41” (101.6cm)
Track Width 35.2” (89.4cm) center to center of rear
tires.
30.4” (77.2cm) center to center of castor
tires.
37.5in. (95.3cm) center to center of rear
tires.
30.4” (77.2cm) center to center of castor
tires.
Deck Width 62.5” (158.8cm) with defl ector down. 68” (165.1cm) with defl ector down.
Weight: 646 lbs. (293 kg) (estimated) 695 lbs. (315 kg) (estimated)
Height of Cut: Adjusts from 1.5” to 4.5” (7 postions) Adjusts from 1.5” to 4.5” (7 postions)
Tip Speed: 15,710 ft/min @ 3400 RPM nominal
16,170 ft/min @ 3400 RPM nominal
17,500 ft/min @ 3400 RPM nominal
18,070 ft/min @ 3500 RPM max
SPECIFICATIONS