Operator's Manual

Figure54
1.Clevispininslot
6.Doublenuts
2.Nut7.Jamnut
3.Nut-Lefthandthread
8.Yoke
4.Adjustmentbolt9.Balljoint
5.Pumprod
7.Checkwherethecontrolleverisrelativetothenotch
intheconsole(Figure53).Itshouldbecentered,
allowingthelevertopivotoutwardtotheneutral
lockposition.
8.Ifadjustmentisneeded,loosenthenutandjamnut
againsttheyoke(Figure54).
9.Applyslightrearwardpressureonthemotioncontrol
lever,andturntheheadoftheadjustmentboltin
theappropriatedirectionuntilthecontrolleveris
centeredintheneutrallockposition.
Note:Keepingrearwardpressureontheleverwill
keepthepinattheendoftheslotandallowthe
adjustmentbolttomovethelevertotheappropriate
position.
10.Tightenthenutandjamnut(Figure54).
11.Repeatontheoppositesideofmachine.
HydraulicSystem
Maintenance
ServicingtheHydraulic
System
CheckingtheHydraulicFluid
ServiceInterval:Aftertherst8hours
Every25hours
FluidType:Mobil115W-50syntheticmotoroilor
equivalentsyntheticoil.
Important:Useoilspeciedorequivalent.Other
uidscouldcausesystemdamage.
HydraulicSystemOilCapacity:67ounces(2.0l)
Checkthehydraulicuidlevel:
•Beforetheengineisrststarted.
•Aftertherst8operatinghours.
•Afterevery25operatinghours.
Note:Therearetwowaysofcheckingthehydraulicoil.
Oneiswhentheoiliswarmandoneiswhentheoilis
cold.Thebafeinsidethetankhastwolevelsdepending
iftheoiliswarmorcold.
1.Positionthemachineonalevelsurfaceandsetthe
parkingbrake.
2.Cleantheareaaroundllerneckofhydraulictank
(Figure55).
3.Removethecapfromthellerneck.Lookinsideto
checkifthereisuidinthereservoir(Figure55).
4.Ifthereisnouid,adduidtothereservoiruntilit
reachesthecoldlevelofthebafe.
5.Runthemachineatlowidlefor15minutestoallow
anyairtopurgeoutofthesystemandwarmthe
uid.RefertoStartingandStoppingtheEnginein
Operation,page12.
6.Rechecktheuidlevelwhiletheuidiswarm.The
uidshouldbebetweencoldandhot.
7.Ifrequired,adduidtothehydraulictank.
Note:Theuidlevelshouldbetothetopofthehot
levelofthebafe,whentheuidishot(Figure55).
8.Installthecaponllerneck.
40