Addendum

ManualsBrandsToro ManualsRiding EquipmentToro 74523

FormNo.3402-440RevA

GrandStand

MultiForceMower

With52inor60inTURBOFORCE

CuttingUnit

ModelNo.74523—SerialNo.316000001andUp

ModelNo.74529—SerialNo.316000001andUp

Addendum

RemovingtheMowerDeck

1.Shutofftheengine,waitforallmovingpartstostop,

engagetheparkingbrake,andremovethekey.

2.Usetheheight-of-cutlevertolowerthemowerdeck

ontowoodblocks.

3.Removethemower-deckbelt;refertoReplacingthe

Mower-DeckBeltintheOperator’sManual.

4.Removethe2boltsand2nutsconnectingthestrut

brackettotheframe(Figure1).

Note:Retainthefastenerswiththestrutbracket.

Figure1

Rightsideshown

1.Bolt3.Nut

2.Strutbracket

5.Removethe2bolts,2nuts,andwasherconnectingthe

mower-deckhangerstotheliftplatesforbothsidesof

themowerdeck(Figure2andFigure3).

Note:Retainthemountinghardwarewiththedeck

chains.

Figure2

LeftSideof52-inchDeckShown

1.Liftplate

4.Nut

2.Bolt5.Mower-deckhanger

3.Washer

Figure3

LeftSideof60-inchDeckShown

1.Bolt

4.Liftplate

2.Washer5.Mower-deckhanger

3.Nut

6.Rotatethecasterwheelsforward.

7.Slidethemowerdeckoutfromunderthemachine.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3402-440*A

Summary of content (2 pages)

PAGE 1
Form No. 3402-440 Rev A GrandStand® Multi Force Mower With 52in or 60in TURBO FORCE® Cutting Unit Model No. 74523—Serial No. 316000001 and Up Model No. 74529—Serial No. 316000001 and Up Addendum Removing the Mower Deck 1. Shut off the engine, wait for all moving parts to stop, engage the parking brake, and remove the key. 2. Use the height-of-cut lever to lower the mower deck onto wood blocks. 3. Remove the mower-deck belt; refer to Replacing the Mower-Deck Belt in the Operator’s Manual. 4.
PAGE 2
Installing the Mower Deck 1. Slide the mower deck under the machine. 2. Rotate the caster wheels rearward. 3. Connect the deck hangers to the lift plates using the 2 bolts, 2 nuts, and 2 washers that you retained for each side of the mower deck. Note: Mount the front hanger brackets on the outside of the front lift arms for 52-inch decks (Figure 2). Mount the front hanger brackets on the inside of the front lift arms for 60-inch decks (Figure 3). Note: Torque the bolts to 38 to 49 N∙m (28 to 36 ft-lb). 4.