Operation Manual

Figure6
1.Parkingbrakelever
Note:Theclutch/brakepedalshouldstayinthe
depressed(locked)position.
ReleasingtheParkingBrake
1.Pushdownonthebrakepedalandholdit(Figure5).
2.Movetheparkingbrakelevertotheleft(Figure6).
3.Graduallyreleasethebrakepedal.
PositioningtheSeat
Theseatcanmoveforwardandbackward.Positiontheseat
whereyouhavethebestcontrolofthemachineandaremost
comfortable.
1.Raisetheseatandloosentheadjustmentknobs(Figure
7).
Figure7
1.Adjustmentknobs
2.Movetheseattothedesiredpositionandtightenthe
knobs.
UsingtheBladeControl(PTO)
Thebladecontrol(PTO)knobengagesanddisengagespower
totheblades.
EngagingtheBlades
1.Depressthebrakepedaltostopthemachine.
2.Pullthebladecontrol(PTO)knobouttotheEngaged
position(Figure5).
DisengagingtheBlades
1.Depressthebrakepedaltostopthemachine.
2.Pushthebladecontrol(PTO)knobintothe
Disengagedposition(Figure5).
SettingtheHeightofCut
Usetheheight-of-cutlevertoraiseandlowerthemowerto
thedesiredcuttingheight.Youcansetthecuttingheightto7
differentpositionsfromapproximately30to80mm(1-1/4
to3-1/8inches).
Important:Youmustsettheheight-of-cutlevertothe
highestposition(7)whenyoutransportthemachineoff
thelawntopreventdamagingtheblades.
1.Pushandholdinthebuttonontheheight-of-cutlever
(Figure8).
G01 2441
1
Figure8
1.Height-of-cutlever
2.Shifttheheight-of-cutlevertothedesiredposition.
3.Releasethebutton.
StartingtheEngine
1.Openthefuel-shutoffvalvelocatedbetweenthefuel
tankandtheengine(Figure9).
12