Form No. 3392-285 Rev C Trattore per manto erboso DH 220 Nº del modello 74596—Nº di serie 315000001 e superiori Registrate il vostro prodotto presso www.Toro.com.
Questo prodotto è conforme a tutte le direttive europee pertinenti. Vedere i dettagli nella Dichiarazione di Conformità (DICO) specifica del prodotto, fornita a parte. Il sistema di avvertimento adottato dal presente manuale identifica i pericoli potenziali e riporta messaggi di sicurezza, identificati dal simbolo di avvertimento (Figura 2), che segnala un pericolo in grado di provocare infortuni gravi o la morte se non si osservano le precauzioni raccomandate.
Indice Manutenzione del sistema di trazione .................. 31 Controllo della pressione degli pneumatici .................................................... 31 Revisione del freno ........................................... 31 Revisione del cesto di raccolta ............................. 32 Rimozione del cesto di raccolta......................... 32 Montaggio del cesto di raccolta......................... 32 Pulizia del cesto di raccolta e del canale ...................................................
Sicurezza ◊ traino e distribuzione del carico errati. Questa macchina è stata progettata in conformità con EN ISO 5395:2013. Avvertimenti sull'utilizzo del carburante Norme di sicurezza per rider con tosaerba rotante AVVERTENZAIl carburante è altamente infiammabile. Prendete le seguenti precauzioni. • Conservate il carburante in apposite taniche. • Eseguite i rifornimenti all'aperto e non fumate Leggete e comprendete il contenuto di questo manuale prima di avviare la macchina. durante l'operazione.
• • Arrestate la rotazione delle lame prima di serie lame e bulloni usurati o danneggiati, per mantenere il bilanciamento. Su macchine multilama, ricordate che la rotazione di una lama può provocare la rotazione anche di altre lame. attraversare superfici non erbose. • Quando utilizzate degli accessori, non dirigete mai lo scarico del materiale verso terzi e non consentite ad alcuno di avvicinarsi alla macchina durante il lavoro.
Pressione acustica • Non tenete le apparecchiature con carburante nel serbatoio e all'interno di edifici dove i vapori possono raggiungere fiamme libere o scintille. Questa unità ha un livello di pressione acustica all'orecchio dell'operatore di 82 dBA, con un valore di incertezza (K) di 1 dBA. Il livello di pressione acustica è stato determinato in conformità con le procedure definite nella norma EN ISO 5395:2013. • Lasciate raffreddare il motore prima del rimessaggio al chiuso.
Indicatore di pendenza g011841 Figura 3 È possibile fotocopiare questa pagina per uso personale. 1. La pendenza massima che consente di utilizzare la macchina in modo sicuro è di 15 gradi. Usate il grafico delle pendenze per determinare la pendenza di un terreno prima di utilizzare la macchina. Non utilizzate questa macchina su pendenze superiori ai 15 gradi. Ripiegate il grafico lungo la linea che indica la pendenza consigliata. 2.
Adesivi di sicurezza e informativi Gli adesivi di sicurezza e di istruzione sono chiaramente visibili e sono affissi accanto a zone particolarmente pericolose. Sostituite gli adesivi danneggiati o smarriti. decaloemmarkt Marchio del produttore 1. Indica che la lama è specificata come parte realizzata dal produttore della macchina originale. decal104-3238 119–5517 1. Procedura di avviamento. decal93-7276 93-7276 2. Leggete il Manuale dell'operatore. 1. Pericolo di esplosione – 3.
decal111-5953 111–5953 1. Indicatore dell'altezza di taglio decal106-8552 106-8552 1. Raccogliete l'erba 2. Riciclate decal111-5630 111-5630 1. Tosatura in retromarcia attivata 2. Fari 3. Scaricate il cesto di raccolta 4. Presa di forza (PDF) decal119-2725 119-2725 1. Avvertenza – leggete il Manuale dell'operatore. 2. Avvertenza – rimuovete il cappellotto prima di eseguire qualsiasi intervento di manutenzione sulla macchina. 3. Pericolo di ribaltamento – non usate su pendii di oltre 10°.
Quadro generale del prodotto Comandi decal119-2726 119-2726 Prima di avviare il motore e di utilizzare la macchina, familiarizzate con i comandi (Figura 4). 1. Pericolo di lancio di oggetti – tenete gli astanti a distanza di sicurezza dalla macchina. 2. Pericolo di ferite a mani e piedi – non avvicinatevi alle parti in movimento, non rimuovete le protezioni e gli schermi. decal119-2730 119-2730 1.
Funzionamento Specifiche Peso 256 kg Lunghezza 260 cm Larghezza 110 cm Larghezza di taglio 102 cm Altezza 119 cm Regime del motore 2.600 giri/min Potenza nominale motore 12,1 kW (16,12 cv) a 3000 giri/min Nota: Stabilite i lati sinistro e destro della macchina dalla normale posizione di guida.
Inserimento del freno di stazionamento PERICOLO Il carburante e i relativi vapori sono estremamente infiammabili ed esplosivi. Un incendio o un'esplosione causati dal carburante possono ustionare voi e terzi. Inserite sempre il freno di stazionamento ogni volta che spegnete o lasciate incustodita la macchina. • Per impedire che una carica elettrostatica faccia incendiare il carburante, posate la tanica e/o la macchina direttamente a terra prima del riempimento, mai in un veicolo o su un oggetto.
Impostazione dell'altezza di taglio Utilizzate la leva di regolazione dell'altezza di taglio per sollevare e abbassare il tosaerba all'altezza di taglio desiderata. Potete regolare l'altezza di taglio su 7 posizioni diverse, da circa 30 a 80 mm. Importante: Quando trasportate la macchina lontano dal tappeto erboso dovete regolare la leva dell'altezza di taglio nella posizione più alta (7), per non danneggiare le lame. 1. Premete e mantenete il pulsante della leva dell'altezza di taglio (Figura 7).
Nota: Per avviare un motore a caldo, fate rientrare la manopola dello starter. 7. Girate la chiave di accensione in senso orario e tenetela in posizione Start (Figura 10). g017884 Figura 10 g008258 1. Chiave di accensione 2. Avvio Figura 8 1. Valvola di intercettazione del carburante 4. Fari 5. Spento 3. On Nota: La maniglia della valvola deve essere allineata con il tubo del carburante. Nota: Rilasciatela quando il motore si accende. 2. Sedetevi sul sedile.
Uso del sistema interruttori di sicurezza Se dovete utilizzare il comando delle lame (PDF) durante la retromarcia, escludete il microinterruttore di sicurezza agendo sull'interruttore KeyChoice, situato accanto alla staffa del sedile (Figura 11). Intervallo tra gli interventi tecnici: Prima di ogni utilizzo o quotidianamente ATTENZIONE Se gli interruttori di sicurezza a interblocchi sono scollegati o avariati, la macchina può avviarsi improvvisamente e provocare infortuni.
2. Inserite la chiave KeyChoice nell'interruttore (Figura 11). 3. Girate la chiave KeyChoice. freno di stazionamento e girate la chiave di accensione in posizione Start: il motore non deve girare. Nota: La spia di retromarcia sulla consolle 3. Mettete il pedale della trazione in folle, innestate il freno di stazionamento, spostate la manopola di comando della lama (PDF) in posizione di disinnesto e avviate il motore.
g017874 Figura 13 1. Posizione di spinta 2. Posizione di funzionamento g017875 Figura 14 1. Pedale di marcia avanti Azionamento della macchina 1. Inserite il freno di stazionamento. 2. Estraete il comando della trazione dalla posizione di funzionamento (Figura 13) per ingranare la trazione. 3. 2. Pedale della retromarcia Nota: Per aumentare la velocità premete sul pedale di marcia avanti. Per rallentare rilasciate la pressione sul pedale di comando della trazione.
Nota: Togliete la chiave di accensione e la chiave KeyChoice. ATTENZIONE Bambini ed altre persone potrebbero ferirsi se dovessero spostare o cercare di azionare la macchina quando è incustodita. Togliete sempre la chiave di accensione e la chiave KeyChoice, ed innestate il freno di stazionamento prima di lasciare incustodita la macchina, anche per pochi minuti. Uso della funzione Recycle-on-demand g017876 Figura 15 1.
Scarico posteriore dello sfalcio A volte, quando l'erba è troppo lunga per poterla raccogliere, potreste avere bisogno di falciare il tappeto erboso senza il cesto. 1. Sganciate il fermo di chiusura (Figura 17). g017883 Figura 19 1. Fermo di chiusura 4. Tosate l'erba come desiderato, con il cesto di raccolta in posizione aperta. 5. Prima di riportare il cesto di raccolta nella posizione di servizio, spostate la macchina in avanti per liberare il cesto dei residui d'erba. 6.
Suggerimenti • Per ottenere una resa migliore azionate il motore alla massima. Il tosaerba ha bisogno di aria per tagliare minuziosamente lo sfalcio, quindi non utilizzate un'altezza di taglio troppo bassa e non circondate completamente il tosaerba da erba non tagliata. Perché l'aria venga aspirata nel tosaerba, lasciate sempre un lato del tosaerba lontano dall'erba non tagliata. • Tagliate l'erba leggermente più alta del normale, per evitare il contatto del tosaerba con le asperità del terreno.
Manutenzione Nota: Stabilite i lati sinistro e destro della macchina dalla normale posizione di guida. Programma di manutenzione raccomandato Cadenza di manutenzione Dopo le prime 5 ore Prima di ogni utilizzo o quotidianamente Procedura di manutenzione • Cambiate l'olio motore. • • • • • • Controllate il sistema di sicurezza a interblocchi. Controllate il livello dell'olio motore. Controllate il livello dell'elettrolito della batteria. Controllate il freno. Controllate le lame.
3. Spegnete il motore e attendete che tutte le parti in movimento si siano fermate. 4. Togliete la chiave di accensione. 5. Pulite con uno straccio i raccordi di ingrassaggio e raschiate via qualsiasi traccia di vernice dalla parte anteriore dei raccordi. 6. Collegate un ingrassatore ad aria compressa ad ogni raccordo, e pompatevi del grasso. 7. Tergete il grasso superfluo. Punti di ingrassaggio g008270 Figura 21 Punti di ingrassaggio Art.
Pulizia del filtro dell'aria 3. Inserite il freno di stazionamento. 4. Spegnete il motore e attendete che tutte le parti in movimento si siano fermate. 5. Togliete la chiave di accensione. 6. Lasciate raffreddare il motore. 7. Aprite il cofano. 1. Controllate che il filtro dell'aria non sia strappato, che non vi siano strati untuosi o e che la tenuta in gomma non sia danneggiata. 2. Per eliminare i detriti, picchiettate delicatamente il filtro su una superficie rigida.
4. Spegnete il motore e attendete che tutte le parti in movimento si siano fermate. 5. Togliete la chiave di accensione. 6. Aprite il cofano. 7. Pulite attorno all'asta di livello (Figura 25) in modo che la morchia non possa penetrare nel foro di rifornimento e danneggiare il motore. 2. Parcheggiate la macchina in modo che il lato di spurgo sia leggermente più basso rispetto al lato opposto, per garantire l'efflusso completo dell'olio. 3. Disinnestate le lame (PDF). 4.
g008301 Figura 27 1. Filtro dell'olio motore 2. Guarnizione 3. Adattatore g025109 Figura 28 3. Spalmate un velo di olio nuovo sulla guarnizione di gomma del nuovo filtro dell'olio (Figura 27). 4. Montate il nuovo filtro dell'olio sull'adattatore, girandolo in senso orario finché la guarnizione non è a contatto con l'adattatore del filtro. 5. Serrate il filtro dell'olio di un altro mezzo o tre quarti di giro (Figura 27). 6.
3. Collegate il cappellotto alla candela (Figura 28). 4. Chiudete il cofano. Manutenzione del sistema di alimentazione Spurgo del serbatoio del carburante Spurgate il serbatoio del carburante qualora non usiate la macchina per più di 30 giorni. PERICOLO In talune condizioni il carburante e i relativi vapori sono estremamente infiammabili ed altamente esplosivi. Un incendio o un’esplosione causati dal carburante possono ustionare voi ed altre persone e provocare danni.
g025110 Figura 30 1. Fascetta stringitubo 3. Filtro carburante 2. Tubo di alimentazione g008278 8. Staccate il tubo del carburante dal filtro (Figura 30) e spurgate il carburante in una tanica o in una bacinella di spurgo omologate. Figura 31 1. Valvola di intercettazione del carburante Nota: Questo è il momento più opportuno per montare un nuovo filtro, in quanto il serbatoio del carburante è vuoto. 9. 10. 6. Aprite il cofano. 7.
Manutenzione dell'impianto elettrico Sostituzione delle lampade dei fari anteriori 1. Disinnestate le lame (PDF). 2. Inserite il freno di stazionamento. 3. Spegnete il motore e attendete che tutte le parti in movimento si siano fermate. 4. Togliete la chiave di accensione. 5. Aprite il cofano. 6. Estraete il portalampada (Figura 32). 8. Staccate la lampada vecchia. 9. Montate una lampada nuova. 10.
Rimozione della batteria AVVERTENZA L'errato percorso dei cavi della batteria può danneggiare la macchina ed i cavi, e provocare scintille che possono fare esplodere i gas delle batterie e causare infortuni. AVVERTENZA I morsetti della batteria e gli attrezzi metallici possono creare cortocircuiti contro i componenti metallici, e provocare scintille, che possono fare esplodere i gas delle batterie e causare infortuni.
Ricarica della batteria AVVERTENZA Durante la ricarica della batteria si sviluppano gas esplosivi. Non fumate mai nelle adiacenze della batteria, e tenete scintille e fiamme lontano dalla batteria. g006918 Importante: La batteria deve essere sempre Figura 36 1. Tappi di riempimento completamente carica (peso specifico 1,260), specialmente a temperature inferiori a 0 °C, per non danneggiarla. 3. Linea inferiore 2. Linea superiore 1.
Manutenzione del sistema di trazione Controllo della pressione degli pneumatici Intervallo tra gli interventi tecnici: Ogni 25 ore/Ogni anno (optando per l’intervallo più breve) Mantenete la pressione dell'aria nei pneumatici anteriori a 1,2 bar e nei pneumatici posteriori a 1 bar. Controllate la pressione sullo stelo della valvola (Figura 37). Per ottenere valori più attendibili, controllate gli pneumatici a freddo. g008269 Figura 38 1.
4. Rilasciate il freno di stazionamento; quando spingete la macchina le ruote posteriori devono girare liberamente. In caso contrario girate il dado di regolazione del freno in senso antiorario quanto basta per spingere la macchina. 5. Controllate nuovamente il funzionamento del freno; vedere Controllo del freno (pagina 31). Revisione del cesto di raccolta Rimozione del cesto di raccolta 1. Bloccate il fermo di chiusura sul cesto di raccolta (Figura 39). g017881 Figura 39 2.
sia correttamente posizionato sul tosaerba. Il tosaerba non entra in funzione se il cesto di raccolta non è correttamente montato. Manutenzione della scocca del tosaerba Sbloccate il perno di bloccaggio per consentire lo svuotamento del cesto di raccolta. Revisione delle lame Nota: Assicuratevi che il cesto di raccolta 2. Intervallo tra gli interventi tecnici: Prima di ogni utilizzo o quotidianamente Pulizia del cesto di raccolta e del canale 1. Disinnestate le lame (PDF). 2.
scanalature in questa parte della lama, montate immediatamente lame nuove. 4. Sostituite immediatamente i perni di sicurezza se sono spezzati (Figura 41). g000047 Figura 43 Importante: Se i perni di sicurezza sono spezzati, è possibile che la cinghia del tosaerba sia danneggiata. Controllate la cinghia; vedere Rimozione del tosaerba (pagina 34). 1. Lama 2. Bilanciatore Montaggio delle lame Rimozione delle lame 1. 1. Rimuovete il tosaerba; vedere Rimozione del tosaerba (pagina 34). 2.
9. Rimessaggio Tirate verso l'interno il braccio di rinvio e togliete la cinghia trapezoidale dalla puleggia (Figura 45). 1. Disinnestate le lame (PDF). 2. Inserite il freno di stazionamento. 3. Spegnete il motore e attendete che tutte le parti in movimento si siano fermate. 4. Togliete la chiave di accensione. 5. Rimuovete il cesto di raccolta e pulitelo; vedere Rimozione del cesto di raccolta (pagina 32). 6.
vedere Spurgo del serbatoio del carburante (pagina 26). D. Avviate il motore e fatelo girare finché non si spegne. E. Avviate o iniettate il carburante per favorire l'accensione del motore. F. Avviate il motore e lasciatelo girare finché non si avvia più. G. Riciclate il carburante usato, nel rispetto delle leggi locali. H. Chiudete la valvola di intercettazione del carburante. Importante: Non conservate carburante con stabilizzatore/condizionatore per oltre 90 giorni. 13.
Localizzazione guasti Problema Il motorino di avviamento non si avvia. Possibile causa 1. La manopola di comando della lama (PDF) è innestata. 1. Spostate la manopola di comando della lama (PDF) in posizione di disinnesto. 2. Il freno di stazionamento non è inserito. 3. La batteria è scarica. 4. I collegamenti elettrici sono corrosi o allentati. 2. Inserite il freno di stazionamento. 3. Caricate la batteria. 4. Controllate il contatto dei collegamenti elettrici. 5. Sostituite il fusibile. 5.
Problema Si nota una vibrazione anormale. Possibile causa 1. Le lame sono curve o sbilanciate. 1. Montate lame nuove. 2. Le viti di fissaggio delle lame sono allentate. 3. I bulloni di fissaggio del motore sono allentati. 4. è allentata una puleggia del motore, o la puleggia tendicinghia o la puleggia delle lame. 5. La puleggia del motore è danneggiata. 2. Serrate le viti di fissaggio delle lame. 6. La puleggia delle lame è danneggiata. Le lame non girano. L’altezza di taglio è irregolare.
Schemi g028271 (Rev.
Note:
Note:
Note:
Informativa europea sulla privacy Dati raccolti da Toro Toro Warranty Company (Toro) rispetta la privacy. Al fine di elaborare i reclami in garanzia e contattarvi in caso di richiamo di un prodotto, vi chiediamo di comunicarci determinati dati personali direttamente o tramite il rivenditore Toro in loco o The Toro Company. Il sistema di garanzia Toro è installato su server situati negli Stati Uniti, dove la legge sulla tutela della privacy può prevedere una protezione diversa da quella del vostro paese.
Prodotti per uso residenziale La garanzia Toro e Garanzia sull'avviamento Toro GTS Condizioni e prodotti coperti Toro Company e la sua affiliata, Toro Warranty Company, ai sensi di un accordo tra le medesime, garantiscono all'acquirente originale1 la riparazione del prodotto Toro sottoelencato, qualora presenti difetti di materiale o lavorazione o se il motore coperto da garanzia Toro GTS (Guaranteed to Start) non si avvia al primo o al secondo tentativo, a condizione che siano state eseguite le operazioni