Service Manual

HYDRO-GEAR TRANSAXLE

4 - 12 TimeCutter



Z Service Manual

2. Pull back on the brake rod and adjust the nut on

the end of the rod (Figure 63) until the tab at the

bottom of the brake lever and the tab located on

the transaxle housing meet (Figure 64).

Figure 63

mvc-177

Figure 64 mvc-179

3. Move the forward/reverse handle to the park

position (handles out) and then back to the run

position (handles in). Make sure the brake arms

are clear from the disc brake cogs in the run

position (Figure 65).

Figure 65

mvc-182

Actuator Arm Removal

1. Remove side panel, see “Side Panel Removal” on

page 3 - 4.

2. Unbolt and remove the damper control strut

(Figure 66).

Figure 66

mvc-147