Service Manual

7-17
Table of Contents
Disassembly
Twin Cylinder Engine Service Manual
February 2017 - Digital Edition
ENGINE DISASSEMBLY
Disassembly Upper End (Cont.)
Air Filter Manifold
NOTE: The air lter manifold is made of cast aluminum for durability. Both the engine breather and the
fuel tank vent ports attach to it, see “Air Filter Manifold,” chapter 2, page 2-4.
1. Remove the four nuts retaining the air lter manifold to the carburetor.
2. Cut the zip tie retaining the fuel tank vent hose to the intake manifold (Figure 18).
3. Slide the manifold off the four studs with the breather hose and tank vent hose still attached to the manifold.
NOTE: The breather hose is only clamped at the manifold.
4. Remove the air lter manifold gasket if still on the studs.
NOTE: Remove hoses if replacing the air lter manifold.
Figure 18