Service Manual

7-21
Table of Contents
Disassembly
Twin Cylinder Engine Service Manual
February 2017 - Digital Edition
ENGINE DISASSEMBLY
Disassembly Upper End (Cont.)
Intake Manifold
NOTE: The intake manifold has the engine wire harness attached to it with zip ties. If reusing all
components, remove as an assembly; intake manifold, wire harness and voltage regulator
mounted to the dipstick tube (Figure 23).
1. Remove two mounting bolts from the top of each head.
2. Remove the wire harness ground bolt located below the voltage regulator.
3. Remove the intake manifold along with the wire harness/voltage regulator and dipstick tube (Figure 24).
Figure 23
Figure 24