Service Manual

7-22
Table of Contents
Twin Cylinder Engine Service Manual
February 2017 - Digital Edition
ENGINE DISASSEMBLY
Disassembly Upper End (Cont.)
Voltage Regulator with Wire Harness
Refer to intake manifold removal, see “Intake Manifold,” chapter 7, page 7-21.
NOTE: The voltage regulator contains the engine wire harness and is mounted to the dipstick tube (Figure
25).
Dipstick and Tube
1. Remove the blower shroud shoulder bolt, if not previously removed.
2. Remove voltage regulator, if not previously removed, refer to “Voltage Regulator with Wire harness” above.
3. Remove dipstick and tube assembly.
Figure 25