Service Manual

9-12
Table of Contents
Twin Cylinder Engine Service Manual
February 2017 - Digital Edition
ENGINE ASSEMBLY
Assemble Lower End (Cont.)
Camshaft and Followers
1. Oil and insert the exhaust and intake followers (tappets), each into their respective holes in the crankcase.
NOTE: Intake is upper, exhaust is lower.
2. Rotate the crankshaft so the timing mark points toward the camshaft location.
3. Oil camshaft bearing and lobes.
4. Rotate and insert camshaft to match the timing marks on the crankshaft (Figure 12).
5. Verify crankshaft moves freely.
Figure 12