Service Manual
8-14
Digital Edition - TIMECUTTER® HD Service Manual
April 2017
Table of Contents
MOWER DECK
Leveling the Mower Deck (Cont.)
6. Measure between the outside cutting edges and the at surface. If all measurements are not within 3/16 in. (5
mm), an adjustment is required.
7. Rotate the blades so that they are perpendicular to the rear of the deck (Figure 14). If the front blade tip is not
1.6 - 7.9 mm (1/16 - 5/16 in.) lower than the rear blade tip, continue with Leveling the Mower Deck.
A
A
A
B
B
B
C
C
C
C
C
C
Figure 14
A. Blades Side-to-Side
B. Outside Cutting Edge
C. Measure from the tip of the
blade to the at surface here