Manualshelf

Service Manual

ManualsBrandsToro ManualsOutdoor Power EquipmentTimeCutter MX6050 60 in. Fab 24.5 HP V-Twin Gas Zero-Turn Riding Mower with Smart Speed
131132133134135136137138139140
9-8
Digital Edition - TIMECUTTER® HD Service Manual
April 2017
Table of Contents
ELECTRICAL
Operator Presence Switch (Seat Switch)
With the ignition switch in the RUN position, and the operator presence switch closed (operator is in the seat),
battery voltage is supplied to the left hand neutral switches.
NOTE: The operator presence switch is part of the seat assembly.
Testing
1. Disconnect the wire harness from the Operator Presence Switch, located on the bottom of the seat assembly.
2. Using a digital multi-meter set to the OHM or Continuity setting, test the continuity between the two switch
terminals.
-When the seat is vacated, the switch should NOT have continuity (open).
-When the operator is present, the switch should have continuity (closed).
Seat Switch
Figure 7