Manualshelf

Service Manual

ManualsBrandsToro ManualsOutdoor Power EquipmentTimeCutter MX6050 60 in. Fab 24.5 HP V-Twin Gas Zero-Turn Riding Mower with Smart Speed
21222324252627282930
3-10
Digital Edition - TIMECUTTER® HD Service Manual
April 2017
Table of Contents
MAINTENANCE
Servicing the Toro Engine (Cont.)
Servicing the Spark Plug
Service Interval:
Every 100 hours/Yearly (whichever comes rst)—Check the spark plugs.
Every 200 hours/Every 2 years (whichever comes rst)—Replace the spark plugs.
Make sure the air gap between the center and side electrodes is correct before installing the spark plug. Use a
spark plug wrench to remove and install the spark plug. Use a gapping tool or feeler gauge to check and adjust
the air gap. Install a new spark plug if necessary.
Type: Champion RN9YC or equivalent
Air Gap: 0.030 in. (0.76 mm)
Removing the Spark Plug
1. Park the machine on a level surface and disengage the PTO. Stop the engine, wait for all moving parts to stop,
and remove key. Engage the parking brake.
2. Disconnect the wire from the spark plug.
NOTE: Due to the deep recess around the spark plug, blowing out the cavity with compressed air is
usually the most effective method for cleaning. The spark plug is most accessible when the
blower housing is removed for cleaning.