Service Manual

7-29

Table of Contents

Disassembly

Twin Cylinder Engine Service Manual

February 2017 - Digital Edition

ENGINE DISASSEMBLY

Disassembly Lower End (Cont.)

Sump Cover

1. Remove the oil pump assembly (A), if not previously removed, see “Oil Pump,” chapter 7, page 7-28.

2. Remove the ten (Figure 35) bolts retaining the sump cover to the engine crankcase.

3. Clean the crankshaft of rust and debris.

4. Remove the sump cover with the drain hose.

NOTE: A plastic mallet will assist in loosening the cover from the crankcase.

5. Remove the two alignment pins.

6. Remove and discard the gasket.

NOTE: Use liquid gasket remover to assist in cleaning gasket. Do not use metal tools to scrape gasket.

Figure 35