Service Manual

7-30

Table of Contents

Twin Cylinder Engine Service Manual

February 2017 - Digital Edition

ENGINE DISASSEMBLY

Disassembly Lower End (Cont.)

Sump Cover (Cont.) (Figure 36 and 37)

a. Pressure lube check ball system (A) (Figure 37)

1. Remove the screw and retainer.

2. Remove the spring and check ball.

b. Oil pre-screen assembly (B) (Figure 37)

1. Remove the two screws and cover.

2. Remove the screen and retainer (Figure 37).

c. Governor assembly (optional removal) (C) (Figure 37)

1. From the outside of the sump cover use a 7/32 in. or 15/64 in. roll pin punch to carefully drive the center

dowel of the governor assembly out of the sump cover.

d. Remove the oil deector (rubber) (D) (Figure 37).

Figure 36

A B

Figure 37