Service Manual

8-25

Table of Contents

Inspection

Twin Cylinder Engine Service Manual

February 2017 - Digital Edition

ENGINE INSPECTION AND RECONDITIONING

Lower End Inspection and Reconditioning (Cont.)

Governor Assembly

1. Inspect the gear for wear or damage.

2. Inspect the weights and spool for free movement.

3. Measure end play clearance between the washer and housing.

4. Measure and compare to specications, governor end play 0.05 in. (0.35 mm) (Figure 25).

Mounting Hardware Inspection

1. Clean threads of all removed hardware.

2. Inspect all, replace if corroded, damaged or stretched.

Figure 25

A. Spool

B. Shaft

C. Gear w/Fly Weights

D. Anchored Washer