Service Manual

9-33
Table of Contents
Reassembly
Twin Cylinder Engine Service Manual
February 2017 - Digital Edition
ENGINE ASSEMBLY
Assemble Upper End (Cont.)
Throttle/Choke Control Plate
1. Hook the choke spring to the control plate and choke arm on the control plate if previously removed (Figure 35).
NOTE: Choke spring is 2.44 on. (61.98 Nm) long with coils compressed, throttle spring is 1.64 in. (41.66
Nm) long with coils compressed.
2. Hook the governor spring to hole “C” of governor arm and to throttle pivot on the control plate (Figure 36).
3. Install plate to each head with one bolt.
4. Torque the throttle/choke bracket assembly bolts to 89 in-lbs. (10 Nm).
Figure 35
Figure 36