Service Manual

9-36

Table of Contents

Twin Cylinder Engine Service Manual

February 2017 - Digital Edition

ENGINE ASSEMBLY

Assemble Upper End (Cont.)

Air Filter Manifold

1. Install the gasket onto the intake manifold studs (Figure 40).

2. Install the air lter manifold onto the intake manifold studs.

NOTE: Slide the breather vent hose (A) (Figure 40) over the tting on #1 head while installing the

manifold.

3. Retain manifold with four nuts.

4. Torque the intake manifold bolts to 89 in-lbs. (10 Nm).

5. Route the fuel tank vent hose (B) (Figure 41) over the intake manifold near #1 head and retain with a plastic tie.

NOTE: Hose exits the engine near the electric starter (Figure 41).

Figure 40

Figure 41