Service Manual
9-28
Table of Contents
Twin Cylinder Engine Service Manual
February 2017 - Digital Edition
ENGINE ASSEMBLY
Assemble Upper End (Cont.)
Lower Bafe
1. Place the lower bafe on the engine block while holding the stator wires in recess of the crankcase (Figure 29).
NOTE: Do not pinch the stator or harness wires.
2. Install with four bolts.
3. Torque the bafe, cylinder shoulder bolts to 89 in-lbs. (10 Nm).
4. Loosely mount the dipstick tube to the lower bafe with shoulder bolt.
Figure 29