Service Manual

4-9
Table of Contents
Control Plate
Twin Cylinder Engine Service Manual
February 2017 - Digital Edition
CONTROL PLATE (THROTTLE AND CHOKE)
Linkages and Springs (Cont.)
Disassembly
Link (Choke or Throttle)
1. Unclip the quick clip (A) (Figure 3) and rotate away from link.
2. Remove the upper end from the carburetor.
3. Unhook the lower end and remove the link (Figure 10).
Adjustment
Top No-Load RPM
A) Verify
1. Start and run engine until at operating temperature.
2. Move the throttle control to “Fast Speed” setting.
3. Check RPM with tachometer, top no-load RPM 3300 ± 100 RPM.
Figure 10
Choke Clip Throttle Clip