Service Manual

MOWER DECK

5-172007 - 2008 Titan Z Service Manual

3. With 3 washers installed on the electric PTO clutch

bolt, apply thread locking compound to the threads

of the clutch bolt (Fig. 289).

Fig. 289 IMG-0429a

4. Install the clutch bolt, 2 spring washers, and washer

to the crankshaft. Torque the clutch bolt to 55 ft-lbs.

(74.6 Nm).

5. Plug the harness plug into the electric PTO clutch

plug (Fig. 290).

Fig. 290 IMG-0377a

6. Install the mower deck belt around the electric PTO

clutch pulley (Fig. 291).

7. Pull the idler arm assembly on the mower deck

toward the rear of the unit and route the mower deck

belt around the idler pulley (Fig. 292).

Fig. 291 IMG-0372

Fig. 292 IMG-0432

8. Install the negative battery cable to the negative

terminal on the battery.