Service Manual

ENGINE
6-8 2007 - 2008 Titan Z Service Manual
6
8. Install the violet wire plug into the red alternator wire
plug (Fig. 333).
9. Install the choke cable into the choke linkage located
on the rear of the engine (Fig. 334).
11. Install the throttle cable into the throttle linkage
located on the rear of the engine (Fig. 336).
10. Move the choke control lever in the full open position
(the choke linkage is moved all the way to the left).
Install the choke cable into the bottom portion of the
clamp and tighten the clamp to secure (Fig. 335).
Fig. 333 IMG-0260
Fig. 334 IMG-0407a
Fig. 335 IMG-0408
Fig. 336 IMG-0409