Service Manual

ENGINE

6-10 2007 - 2008 Titan Z Service Manual

16. Slide the engine pulley onto the crankshaft so that

the inside chamfer on the pulley ID is installed

toward the engine and the pulley keyway aligns with

the key in the crankshaft (Fig. 341).

18. With a spring tool (Toro part number 92-5771),

rotate the transmission drive belt spring idler arm to

release tension on idler arm. Route the transmission

drive belt around the idler arm pulley (Fig. 343).

Fig. 341 IMG-0417a

17. Route the transmission drive belt around the engine

sheave (Fig. 342).

Fig. 342 IMG-0419

Fig. 343 IMG-0423a

19. Check the routing of the belt to make sure it routed

around the transmission pulleys, two idler pulleys,

and the engine sheave. Refer to the belt routing

decal (Fig. 344).

Fig. 344 109-6014