Service Manual

HYDROSTATIC DRIVE SYSTEM

7-72007 - 2008 Titan Z Service Manual

Motion Control Damper Replacement

Motion Control Damper Removal

1. Raise the seat.

2. Remove the negative and then the positive battery

cable from the battery.

3. Loosen the two wing nuts on the battery hold down

bolts. Remove the battery from the machine (Fig.

380).

5. Remove the motion control damper from the

machine (Fig. 382).

4. Remove the two nuts securing the motion control

damper to the frame and the motion control pivot

(Fig. 381).

Fig. 380 IMG-0456

Fig. 381 IMG-0457

Fig. 382 IMG-0460