Service Manual

HYDROSTATIC DRIVE SYSTEM
7-10 2007 - 2008 Titan Z Service Manual
7
8. Remove the bolt and nut securing the steering rod
to the left hand motion control pivot assembly (Fig.
391).
10. Remove the control pivot pin from the motion control
pivot assembly (Fig. 393).
7. Remove the nut from the top of the left hand motion
control damper and move the damper out of the
motion control pivot (Fig. 390).
9. Remove the cotter pin located on the control pivot
pin (Fig. 392).
Fig. 390 IMG-0480
Fig. 391 IMG-0482a
Fig. 392 IMG-0483a
Fig. 393 IMG-0484a