Service Manual

HYDROSTATIC DRIVE SYSTEM
7-12 2007 - 2008 Titan Z Service Manual
7
Motion Control Pivot Disassembly
3. With a long punch and hammer, remove the two
bearings in the motion control pivot (Fig. 397).
Fig. 397 IMG-0494a
2. Remove the two bolts, metal washers, (2) plastic
washers, and nuts retaining the lever mount post to
the motion control pivot (Fig. 396).
1. Remove the neutral switch from the motion control
pivot assembly (Fig. 395).
Fig. 395 IMG-0516a
Fig. 396 IMG-0489a