Service Manual

HYDROSTATIC DRIVE SYSTEM

7-232007 - 2008 Titan Z Service Manual

5. Install the right side spring anchor plate onto the

right brake handle clevis pin. Install a cotter pin to

secure (Fig. 434).

7. Install an e-clip to retain the brake arm to the brake

shaft assembly (Fig. 436).

Fig. 434 IMG-0539a

6. Install the brake arm from the brake shaft assembly

to the seat box assembly (Fig. 435).

Fig. 435 IMG-0529

Fig. 436 IMG-0528a

8. Rotate the brake shaft assembly up and slide the

right and left spring anchor plates through the slots

in the brake shaft assembly (Fig. 437).

Fig. 437 IMG-0543