Service Manual

CHASSIS

3-32007 - 2008 Titan Z Service Manual

Front Caster Fork Bearing

5HSODFHPHQW

Front Caster Fork Bearing Removal

4. Slide the caster fork assembly out of the front axle

bearings (Fig. 008).

The following procedure is performed on the left hand

caster fork assembly. The same procedure should

be followed when replacing the right hand caster fork

assembly and bearings.

3. Remove the hex head bolt and washer securing the

caster fork assembly to the front axle (Fig. 007).

1. Park the machine on a level surface, disengage

the blade control (PTO), and turn the ignition key to

“OFF” to stop the engine. Remove the ignition key.

2. Raise the front of the machine high enough to permit

removing the caster fork assembly from the front

axle assembly (Fig. 006).

Fig. 006 IMG-0163a

Fig. 007 IMG-0164

Fig. 008 IMG-0165