Service Manual
CHASSIS
3-4 2007 - 2008 Titan Z Service Manual
3
Front Caster Fork Bearing Installation
3. Lower the machine to the ground and remove the
ÀRRUMDFN
5. Using a drift punch and hammer, tap the lower ball
bearing out of the front axle frame (Fig. 009).
6. With a drift punch and hammer, tap the upper ball
bearing out of the front axle frame (Fig. 010).
1. Install the upper and lower ball bearings into the
front axle frame (Fig. 011).
Fig. 009 IMG-0166
Fig. 010 IMG-0167
Fig. 011 IMG-0168
2. Slide the caster fork assembly into the front axle
frame, through the upper and lower ball bearings.
Install a washer and bolt to secure the caster as-
sembly to the front axle frame (Fig. 012).
Fig. 012 IMG-0169