Service Manual

CHASSIS

3-432007 - 2008 Titan Z Service Manual

39. Install the two ground wires to the engine base and

install a nut to secure (Fig. 159).

38. Install the yellow/white wire plug into the grey/black

wire plug that goes to the fuel solenoid and engine

magneto (Fig. 158).

40. Position the solenoid to the back side of the seat

box assembly. Install two bolts, washers, and nuts to

secure it to the seat box assembly (Fig. 160).

Fig. 158 IMG-0258

Fig. 159 IMG-0257

Fig. 160 IMG-0254a

41. Install the wires on the four solenoid terminals (Fig.

161):

Fig. 161 IMG-0251

A. Kill Relay/PTO Clutch (Green/Green)

B. Ignition Switch (Blue)

C. Battery and Fuse block (Large red and small red)

D. Starter (Red)