Service Manual

CHASSIS
3-472007 - 2008 Titan Z Service Manual
3
55. Position the seat plate on the seat assembly to the
inside of the mounting tabs on the seat box. Install
the seat pivot rod through the mounting holes. Install
a cotter pin into the end of the seat pivot rod to
secure (Fig. 173).
57. Route the seat switch harness wire through the wire
clamp located on the bottom of the seat plate (Fig.
175).
Fig. 173 IMG-0227
56. Support the seat and position the seat stop cable to
the right inside the seat box. Install a bolt and nut
to secure seat stop cable to the seat box assembly
(Fig. 174).
Fig. 174 IMG-0224
Fig. 175 IMG-0223
58. Plug the wire harness into to the seat switch (Fig.
176).
Fig. 176 IMG-0221