Operator's Manual
Table Of Contents
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
- Adding Fuel
- Checking the Engine-oil Level
- Breaking In a New Machine
- Using the Rollover Protection System (ROPS)
- Think Safety First
- Operating the Parking Brake
- Operating the Mower Blade-control Switch (PTO)
- Operating the Throttle
- Operating the Choke
- Operating the Ignition Switch
- Using the Fuel Shutoff Valve
- Starting and Stopping the Engine
- Using the Safety-interlock System
- Driving Forward or Backward
- Stopping the Machine
- Adjusting the Height-of-Cut
- Adjusting the Anti-scalp Rollers
- Adjusting the Flow Baffle Cam Locks
- Positioning the Flow Baffle
- Positioning the Seat
- Unlatching the Seat
- Changing the Seat Suspension
- Using the Drive-wheel-release Valves
- Using the Side Discharge
- Transporting Machines
- Loading Machines
- Adding Light Oil or Spray Lubrication
- Greasing the Mower
- Lubricating the Caster-wheel Hubs
- Servicing the Air Cleaner
- Servicing the Engine Oil
- Servicing the Spark Plug
- Checking the Spark Arrester (if equipped)
- Replacing the Fuel Filter
- Servicing the Fuel Tank
- Servicing the Battery
- Servicing the Fuses
- Checking the Seat Belt
- Checking the Rollover Protection System (ROPS) Knobs
- Adjusting the Tracking
- Checking the Tire Pressure
- Checking the Wheel Lug Nuts
- Checking the Wheel Hub Slotted Nut
- Adjusting the Caster-pivot Bearing
- Using the Clutch Shim
- Cleaning the Engine Screen and Engine-oil Cooler
- Cleaning the Engine-cooling Fins and Shrouds
- Checking and Cleaning the Hydraulic-unit Shrouds
- Adjusting the Parking Brake
- Inspecting the Belts
- Replacing the Mower Belt
- Replacing the Hydraulic Pump-drive Belt
- Adjusting the Control-handle Position
- Adjusting the Motion-control Linkage
- Adjusting the Motion-control Damper
- Adjusting the Motion Control Neutral-lock Pivot
- Servicing the Hydraulic System
- Mower Deck Maintenance
- Cleaning under the Mower
- Disposing of Waste
- NO TITLE
CAUTION
Ifyouleavethekeyintheignitionswitch,someonecouldaccidentlystarttheengineandseriouslyinjure
youorotherbystanders.
Removethekeyfromtheignitionbeforeyoudoanymaintenance.
Lubrication
Greasemorefrequentlywhenoperatingconditionsare
extremelydustyorsandy.
GreaseType:No.2generalpurposelithiumbaseor
molybdenumbasegrease
1.Disengagethebladecontrolswitch(PTO),movethe
motion-controlleverstotheneutral-lockedposition,
andsettheparkingbrake.
2.Stoptheengine,removethekey,andwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
3.Cleanthegreasettingswitharag.
Note:Makesuretoscrapeanypaintoffthefrontof
thetting(s).
4.Connectagreaseguntothetting.
5.Pumpgreaseintothettingsuntilgreasebeginsto
oozeoutofthebearings.
6.Wipeupanyexcessgrease.
AddingLightOilorSpray
Lubrication
ServiceInterval:Every100hours
Lubricatethedeck-liftpivots.
G017028
Figure41
GreasingtheMower
ServiceInterval:Every50hours—Greasethemower-deck
spindlesandtheidlerarm.
Yearly—Greasethepump-belt-idlerarm.
Yearly—Greasethefrontcasterpivots(moreoftenin
dirtyordustyconditions).
Yearly—Repackthefrontcaster-wheelbearings(more
oftenindirtyordustyconditions).
Important:Makesurecuttingunitspindlesarefullof
greaseweekly.
1.Disengagethebladecontrolswitch(PTO),movethe
motion-controlleverstotheneutral-lockedposition,
andsettheparkingbrake.
2.Stoptheengine,removethekey,andwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
3.Greasethemowerdeckidler-pulleypivotuntilgrease
comeoutthebottom(
Figure42).
4.Greasethe3spindlebearingsuntilgreasecomesout
(Figure42).
G009029
Figure42
5.Greasethedrive-belt-idlerarm(Figure43).
33