Operator's Manual
Table Of Contents
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
- Adding Fuel
- Checking the Engine-oil Level
- Breaking In a New Machine
- Using the Rollover Protection System (ROPS)
- Think Safety First
- Operating the Parking Brake
- Operating the Mower Blade-control Switch (PTO)
- Operating the Throttle
- Operating the Choke
- Operating the Ignition Switch
- Using the Fuel Shutoff Valve
- Starting and Stopping the Engine
- Using the Safety-interlock System
- Driving Forward or Backward
- Stopping the Machine
- Adjusting the Height-of-Cut
- Adjusting the Anti-scalp Rollers
- Adjusting the Flow Baffle Cam Locks
- Positioning the Flow Baffle
- Positioning the Seat
- Unlatching the Seat
- Changing the Seat Suspension
- Using the Drive-wheel-release Valves
- Using the Side Discharge
- Transporting Machines
- Loading Machines
- Adding Light Oil or Spray Lubrication
- Greasing the Mower
- Lubricating the Caster-wheel Hubs
- Servicing the Air Cleaner
- Servicing the Engine Oil
- Servicing the Spark Plug
- Checking the Spark Arrester (if equipped)
- Replacing the Fuel Filter
- Servicing the Fuel Tank
- Servicing the Battery
- Servicing the Fuses
- Checking the Seat Belt
- Checking the Rollover Protection System (ROPS) Knobs
- Adjusting the Tracking
- Checking the Tire Pressure
- Checking the Wheel Lug Nuts
- Checking the Wheel Hub Slotted Nut
- Adjusting the Caster-pivot Bearing
- Using the Clutch Shim
- Cleaning the Engine Screen and Engine-oil Cooler
- Cleaning the Engine-cooling Fins and Shrouds
- Checking and Cleaning the Hydraulic-unit Shrouds
- Adjusting the Parking Brake
- Inspecting the Belts
- Replacing the Mower Belt
- Replacing the Hydraulic Pump-drive Belt
- Adjusting the Control-handle Position
- Adjusting the Motion-control Linkage
- Adjusting the Motion-control Damper
- Adjusting the Motion Control Neutral-lock Pivot
- Servicing the Hydraulic System
- Mower Deck Maintenance
- Cleaning under the Mower
- Disposing of Waste
- NO TITLE
1.Disengagetheblade-controlswitch(PTO),movethe
motion-controlleverstotheneutral-lockedposition,
andsettheparkingbrake.
2.Stoptheengine,removethekey,andwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
3.Disconnectthenegativebatterycable(black)fromthe
negative(-)batteryterminal(Figure57).
4.Slidetheredterminalbootoffthepositive(red)battery
terminal,andremovethepositive(+)batterycable
(
Figure57).
5.Removethewingnutsecuringthebatteryclamp
(Figure57).
6.Removetheclamp(Figure57).
7.Removethebattery.
G008804
+
-
+
-
+
-
G008964
1
2
3
4
Figure57
1.Removethewingnutand
clamp
3.Removethepositive
batterycable
2.Removethenegative
batterycablebeforethe
positive
4.Removethebattery
InstallingtheBattery
1.Positionthebatteryinthetraywiththeterminalposts
oppositefromthehydraulictank(Figure57).
2.Installthepositive(red)batterycabletopositive(+)
batteryterminal.
3.Installthenegative(black)batterycableandground
wiretothenegative(-)batteryterminal.
4.Securethecableswith2bolts,2washers,and2locknuts
(
Figure57).
5.Slidetheredterminalbootontothepositive(red)
batterypost.
6.Installtheclampandsecureitwiththewingnut(Figure
57).
ChargingtheBattery
WARNING
Chargingthebatteryproducesgassesthatcan
explode.
Neversmokenearthebatteryandkeepsparksand
amesawayfrombattery.
Important:Alwayskeepthebatteryfullycharged
(1.265specicgravity).Thisisespeciallyimportantto
preventbatterydamagewhenthetemperatureisbelow
0°C(32°F).
1.Chargebatteryfor10to15minutesat25to30amps
or30minutesat10amps.
2.Whenthebatteryisfullycharged,unplugthecharger
fromtheelectricaloutlet,thendisconnectthecharger
leadsfromthebatteryposts(Figure58).
3.Installthebatteryinthemachineandconnectthe
batterycables;refertoInstallingtheBattery(page42).
Note:Donotrunthemachinewiththebattery
disconnected,electricaldamagemayoccur.
42