Service Manual

5-33
Digital Edition - TITAN® HD Service Manual
January 2018
Table of Contents
CHASSIS
Chassis
Motion Control Assembly
Removal
1. Park the machine on a level surface and disengage the PTO. Stop the engine, wait for all moving parts to stop,
and remove the key.
2. Raise and support the unit so that the drive wheels are off the ground.
NOTE: The console may be removed for easier access. See “Console Removal,” chapter 5, page 5-8.
3. Remove the two bolts securing the motion control handle to the motion control assembly.
4. Disconnect the motion control damper from the motion control assembly.
5. Disconnect the motion control linkage from the transmission (Figure 39).
Figure 38
Figure 39