Service Manual

5-39
Digital Edition - TITAN® HD Service Manual
January 2018
Table of Contents
CHASSIS
Chassis
MyRide Replacement (Cont.)
Removal (Cont.)
6. Place shoulder bolt back in upper mount and nger tighten with the lock nut (Figure 45).
7. Attach the seat and sub-frame assembly to the overhead lift using three lift points (Figure 46).
8. Remove the two shoulder bolts securing the trailing arm to the lower ROPS tubes.
9. Using an overhead lift, raise the seat up about 12 in.
10. Disconnect the seat switch.
11. Lift the seat and sub-frame assembly up and away from the machine.
Figure 45
Figure 46