Service Manual

5-41
Digital Edition - TITAN® HD Service Manual
January 2018
Table of Contents
CHASSIS
Chassis
MyRide Replacement (Cont.)
Installation (Cont.)
6. Lower the seat and sub-frame all the way onto the machine.
7. Disconnect the seat and sub-frame from the overhead lift.
8. Secure the front shock with a shoulder bolt.
NOTE: Thread should be on the LH side of the machine (from operator’s position) (Figure 49).
9. Disconnect the seat and sub-frame from the overhead lift.
10. Install the two nuts securing the lower shock mounts to the ROPS tubes. Torque to 90 ± 9 ft-lbs (122 Nm).
11. Raise the ROPS back into operating position.
Figure 49