Service Manual

8-5
Digital Edition - TITAN® HD Service Manual
January 2018
Table of Contents
MOWER DECK
Deck
Mower Belt (Side Discharge Mower Decks)
Replacement
1. Park the machine on a level surface and disengage the PTO. Stop the engine, wait for all moving parts to stop,
and remove the key. Engage the parking brake.
2. Disconnect the battery terminals.
3. Lower the mower deck to the 3 in. (76 mm) height-of-cut position.
4. Remove the mower belt covers.
5. Remove the spring tension from the idler pulley.
NOTE: For 1500 and 2000 series mower decks, use the spring removal tool (Toro part number 92-5771) to
remove the spring from the mower deck post (Figures 4 and 5).
A
B
C
C
D
Figure 4
A. Clutch Pulley
B. Mower Belt
C. Spring-Loaded Idler Pulley
D. Spring