Service Manual

8-9
Digital Edition - TITAN® HD Service Manual
January 2018
Table of Contents
MOWER DECK
Deck
Mower Belt Replacement (Rear Discharge Mower Deck)
1. Park the machine on a level surface and disengage the PTO. Stop the engine, wait for all moving parts to stop,
and remove the key. Engage the parking brake.
2. Disconnect the battery terminals.
3. Lower the mower deck to the 3 in. (76 mm) height-of-cut position.
4. Remove the mower belt covers.
5. Remove the counter rotating belt, see “Replacing the Counter Rotating Belt,” chapter 8, page 8-8.
6. Using a 3/8 in. ratchet in the square hole in the idler arm, turn the breaker bar counterclockwise to remove the
tension from the belt.
7. Remove the belt from the deck pulleys and the clutch pulley.
8. Route the new belt around the clutch pulley and deck pulleys (Figure 8).
.
A
B
C
D
Figure 8
C. Square Hole in the Idler Arm
D. Counter Rotating Belt
A. Mower Belt
B. Spring-Loaded Idler Pulley