Service Manual

8-21
Digital Edition - TITAN® HD Service Manual
January 2018
Table of Contents
MOWER DECK
Deck
Leveling the Mower Deck (Cont.)
10. Place two blocks (see Block Height and Rake table) under the rear edge of the cutting deck skirt, one on each
side of the cutting deck.
11. Set the height-of-cut lever to the 3 in. (76 mm) position.
12. Place two blocks under each side of the front edge of the deck, but not under the anti-scalp roller brackets or
welds (Figure 17).
Block Height and Rake Table
Deck Size Block Height Rake
All Mower Decks 7.3 cm (2.87 in.) 4.8 - 6.4 mm (3/16 - 1/4 in.)
A
A
A A
B
B
Figure 17
A. Block 7.3 cm (2.87 in.)
B. Welds