Service Manual

9-4
Digital Edition - TITAN® HD Service Manual
January 2018
Table of Contents
ELECTRICAL
Fuse Block and Fuses
The fuse block houses the fuses that protect the electrical system from electrical surges.
NOTE: Always use Toro fuses when replacing a damaged or blown fuse.
Testing
1. Visual Inspection: The fuses used in this application may be visually inspected. A failed fuse can be identied
by a broken or melted element inside the fuse cover or a damaged spade (Figure 3).
2. Using a digital multi-meter set to the OHM or Continuity setting, check the continuity between the fuse blades. If
the fuse is OPEN (no continuity), replace the fuse and test the circuit.
Figure 2
Figure 3
Bad Good