Service Manual

3-30

Digital Edition - TITAN® HD Service Manual

January 2018

Table of Contents

MAINTENANCE

Servicing the Kawasaki Engine (Cont.)

Servicing the Primary Filter

• If the primary filter is dirty, bent, or damaged, replace it

• Do not clean the primary filter

Servicing the Safety Filter

Replace the safety filter, never clean it

NOTE: Do not attempt to clean the safety filter. If the safety filter is dirty, then the primary filter is dam-

aged. Replace both filters.

Installing the Filters

NOTE: To prevent engine damage, always operate the engine with both air filters and the cover installed.

1. If installing new filters, check each filter for shipping damage.

NOTE: Do not use a damaged filter.

2. If replacing the safety filter, carefully slide it into the filter body.

3. Carefully, slide the primary filter over the safety filter.

NOTE: Ensure that the primary filter is fully seated by pushing on its outer rim while installing it.

NOTE: Do not press on the soft inside area of the filter.

4. Install the air cleaner cover with the side indicated as UP, facing upward, and secure the latches (Figure 22).

Figure 22

A. Air Cleaner Body

B. Primary Filter

C. Latch

D. Air Cleaner Cover

E. Safety Filter