Service Manual

5-21
Digital Edition - TITAN® HD Service Manual
January 2018
Table of Contents
CHASSIS
Chassis
Roll Over Protection System (ROPS)
Removal
1. Park the machine on a level surface and disengage the PTO. Stop the engine, wait for all moving parts to stop,
and remove the key. Engage the parking brake.
2. Fold the ROPS assembly into the upright position and lock in place (Figure 22).
NOTE: For easier access, remove the right and left side consoles. See “Console Removal,” chapter 5,
page 5-8.
4. Support the ROPS assembly and remove the four mounting bolts (Figure 22).
5. Lift the ROPS assembly off of the machine.
Figure 22