Service Manual

5-27

Digital Edition - TITAN® HD Service Manual

January 2018

Table of Contents

CHASSIS

Chassis

Park Brake Handle Assembly

Removal

1. Park the machine on a level surface and disengage the PTO. Stop the engine, wait for all moving parts to stop,

and remove the key.

2. Disconnect the battery terminals.

3. Release the parking brake (park brake handle down).

4. Remove the left side console. See “Console Removal,” chapter 5, page 5-8.

5. Remove the locking cotter pin securing the upper brake linkage to the park brake lever (Figure 30).

NOTE: To completely remove the upper brake linkage, remove the locking cotter pin from the brake shaft

and remove the clevis pin. The linkage can now be removed from the frame slot for inspection,

adjustment, or replacement.

6. Remove the bolt and ange nut from the park brake lever assembly (Figure 30).

Figure 30

A. Locking Cotter Pin

B. Bolt

C. Flange Nut