Operator's Manual

5
Description UseQty.
Bagger mounting bracket—left
Bagger mounting bracket—right
Bolt, 1/4 x 3/4 in.
Bolt, 3/8 x 1 in.
Carriage bolt, 3/8 x 7/8 in.
Bolt, 5/16 x 3/4 in.
Bolt, 5/16 x 1 in.
Flange nut, 1/4 in.
Flange nut, 5/16 in.
Flange nut, 3/8 in.
Locknut, 3/8 in.
Flat washer, 3/8 in.
Flat washer, 5/16 in.
1
1
2
4
4
4
4
2
8
4
4
4
8
Installing bagger mounting brackets
Bagger
Clevis pin
Hairpin cotter
1
2
2
Installing the bagger
Tensioner pulley and arm with hardware
Spring
Bagger belt
1
1
1
Installing the bagger tensioner pulley and
bagger belt
Weight—left
Weight—right
Weight bracket—left
Weight bracket—right
Support plate
Bolt, 3/8 x 6–1/2 in.
Bolt, 5/16 x 1 in.
Nut, 3/8 in.
Lock washer, 3/8 in.
Flat washer, 3/8 in.
Bolt, 3/8 x 4–1/2 in.
Bolt, 3/8 x 3/4 in.
Self tapping bolt, 3/8 x 5/8 in.
1
1
2
2
1
4
2
8
8
16
4
2
1
Installing the weights
Drilling Holes for the Clutch
Use the metal template, included with the bagger, to locate
the clutch holes.
1. Remove the clutch strap for the clutch (Fig. 2).
2. Unplug the clutch connector (Fig. 2).