Operator's Manual

21
Problem Corrective ActionPossible Causes
Boot and tubes plug too frequently.
1. Hopper is too full. 1. Dump more frequently.
gqy
2. Low engine speed. 2. Always operate the bagger at
full throttle.
3. Grass is too wet. 3. Cut grass when dry.
4. Grass is too long. 4. Cut no more that 2–3 inches or
1/3 of the grass height, which
ever is less.
5. Plugged fan screen. 5. Remove debris, leaves or grass
clippings from the fan screen.
6. Ground speed is too fast. 6. Drive slower at full throttle.
7. Worn belt. 7. Replace belt.
Debris blowout.
1. Hopper is too full. 1. Dump more frequently.
2. Ground speed is too fast. 2. Drive slower at full throttle.
3. Center tunnel baffle not
installed.
3. Install the center baffle when
bagging leaves.
4. Mower is not leveled. 4. See the mower operator’s
manual for leveling the mower.