Operator's Manual

Step

Parts needed for this step:

• 1 Hood assembly

• 2 Bags

• 2 Clevis pins

• 2 Hairpin cotter pins

Installing the Hood Assembly

and Bags

Components around engine will be hot if the

machine has been running. Touching hot

components can cause burns.

• Do not touch engine components when hot.

• Allow engine to cool before performing

maintenance.

Warning

1. Install the hood assembly onto the bagger mounting

bracket (Fig. 24).

m–6758

Figure 24

1. Hood assembly 2. Bagger mounting bracket

2. Install the 2 clevis pins into the hood assembly and

bagger mounting bracket. Secure it with 2 hairpin

cotter pins (Fig. 25).

3 m–6759

Figure 25

1. Hood assembly

2. Bagger mounting bracket

3. Hairpin cotter pin

4. Clevis pin