Operator's Manual

Step
5
Routing the Bagger Belt
into the Blower Assembly
Parts needed for this step:
1
Bagger belt (from Blower and Drive Kit)
Procedure
1. Install the belt around the blo w er pulley
( Figure 12 ).
2. Install the spring to the idler ar m and the peg
on the blo w er assembly ( Figure 12 ).
Figure 12
1. Idler pulley
4. Peg
2. Mower deck pulley 5. Belt
3. Spring
6. Blower pulley
Step
6
Installing the Blower
Assembly
Parts needed for this step:
1
Blower assembly (from Blower and Drive Kit)
1
Spring (from Blower and Drive Kit)
Procedure
An unco v er ed discharge opening could
allo w the la wn mo w er to thr o w objects in
the operator’ s or bystander’ s dir ection and
r esult in serious injur y . Also, contact with
the blade could occur .
• Nev er operate the la wn mo w er unless
y ou install a co v er plate, a mulch plate, or
a g rass chute and catcher .
• Mak e sur e the g rass deflector is installed
when the g rass chute and catcher ar e
r emo v ed.
1. R emo v e the side disc harg e c hute from the
mo w er dec k ( Figure 13 ).
11