Operator's Manual

3. If adjustment is necessar y , loosen the jam n ut

belo w the spring and tighten the n ut directly

belo w the y ok e ( Figure 30 ). T ur n the n ut until

the cor rect measurement is obtained. Tighten

the tw o n uts tog ether and re peat on opposite

side of unit.

4. T ur n n uts cloc kwise to shor ten spring length

and tur n counter -cloc kwise to lengthen the

spring .

5. Eng ag e parking brak e , lev er up .

6. Measure the distance betw een the tr unnion

roller and the collar on brak e rod.

T he measurement should be 3/16-1/4 inc h

(5-7 mm) ( Figure 30 ).

7. If adjustment is necessar y , loosen the jam n ut

directly belo w the y ok e . T ur n the bottom rod

until the cor rect measurement is obtained

( Figure 30 ). Tighten jam n ut at y ok e

Step

Checking the Tire Pressure

No Parts Required

Procedure

Note: Increase the tire pressure due to the

additional w eight.

Chec k and increase the air pressure in the front

caster wheels and rear tires ( Figure 31 ).

Pressure: R ear tires-20 psi (90 kP a)

F ront caster wheels-25 psi (90 kP a)

Figure 31